| Rule 800
Automatic Round 12v
Rule Automatic bilge pumps eliminate the need for a separate float switch to activate the pump. Once power is supplied, starting and stopping is completely automatic. The pump checks for water every 2 + minutes by turning on for a second and measuring load against the impeller. If water is present, the pump remains on until the water is removed. Thereafter the pump resumes its 2-1/2 minute check cycle. The automatic pumps feature two positive leads: an automatic (brown) and a manual override (brown with a white stripe).
Features:
| Specifications:: |
| |
| |
| Voltage |
|
12 Vdc |
| |
| Amp Draw |
|
2.8 amp |
| |
| Fuse Size |
|
5 amp |
| |
| Height |
|
4 1/4 inches 108 mm |
| |
| Width |
|
2 3/8 Inches 60.3 mm |
| |
| Weight |
|
14 oz 400 g | |
